Step 1
Click: Start/settings/Network
and dial Connections/Make new connection/dial-up connection
Step 2
TCP/IP setting/General
Click: use server-assigned address....
Do not click other items
Step 3
TCP/IP settings/ Name servers
Use server-assigned address
Step 4
Configuration/porting setting
Click: Manual dial, if it¡¯s not working,
remove the manual dial (For this step, try not click it
first, if it can¡¯t work, then click it.)
Click: Use terminal window before dialing. (For
this step, not click is OK)
Do not click: Use terminal window after dialing
Baud Rate: 19200 (You
can try 115200 also)
Data Bits: 8
Parity: none
Stop bits: 1
Flow control: hardware
Step 5
Configuration/Call options
Click: Cancel the call if not
connected within 120 seconds
Wait for dial tone before
dialing
Extra setting: Please tell me the service provider¡¯s name, then I can tell you
the setting.
Step 6
Security setting
Click:
Challenge handshake authentication Protocol
Microsoft
Chap (MS-CHAP)
Microsoft CHAP version 2 (Md-chap V2)
Do not click: ? Unencrypted password (PAP)
For MS-CHAP based protocols,
automatically use my windows login name and password (and domain if any).
Step 7
When all the above finished,
Click: phone number
Country number: 44
Area code: 30 (or please get this number from your service
provider)
Phone
number: *99# (or *99***1#, please
get it from your service provider)
Click: Force local call (Do not click is also OK)
Step 8
Click: ¡°finish¡±
Step 9
Click:
RFMON
(You can find it at the right bottom to turn on the GPRS
module) (important)
Step 10
A. If you have removed the manual dial at Configuration/porting setting,
just click the icon of GPRS
at desk. Click Dial Properties button:
Area code: 30 (get this from your
service provider)
Country
number: 44
Then click
connect
B. If you have click manual dial at Configuration/porting
setting, the last step and most important step is that: Click GPRS icon at desk, then click ¡°connect¡±, and when one
interface appears, type in: atd*99#; enter. After first line appears, click
"ok", and then device will be connected to the network
